![Series SB gauge](https://cwireptech.com/industrialsupply/sersbsgauge.gif)
These General purpose dry gauges are popular in the HVAC & plumbing trades, or for anyone using media compatible with brass/bronze. Siphon & valve are suggested for use with steam. Stainless steel case and lens ring. Brass/bronze internal working parts and ¼” lower mount socket. ANSI accuracy Grade A [2-1-2%]. Pointer is adjustable.
Series SB-Dry, Stainless Case, Brass Internals | ||||
Dia | Case | Int | Ranges | Detail |
---|---|---|---|---|
4½” | SS | BR | 15, 30, 60, 100, 160, 200, 300, 400, & 600 psi, V & C | More |
![Series LM gauge](https://cwireptech.com/industrialsupply/serpsgsgauge.gif)
This glycerin filled 4″ gauge was designed for use on concrete ready-mix trucks. It has lower socket with special rear mounting studs. “L” clamps & wing nuts. Increments & numbers over 4500 psi & message “Do Not Exceed 5000 PSI” printed in red. Set pointers to be available shortly as extra cost option.
Series PGB404QLM-S Slump Gauge | |||||
Dia | Socket | PSI | Case | Internals Socket | Detail |
---|---|---|---|---|---|
4″ | ¼” | 5000 | Stainless Steel | Brass/Bronze | More |
![Series RNB-HI
gauge](https://cwireptech.com/industrialsupply/serrnb1sgauge.gif)
For R-12 (Old) or R-134 (New) Refrigerants.
![Series RNB-LO
gauge](https://cwireptech.com/industrialsupply/serrnb2sgauge.gif)
ABS plastic cases with internal parts and 1/8″ socket of brass/bronze. twist on/off poly lens allows easy recalibration. Low range has retard to 300 psi. R-12 & R-134 models are not interchangeable and must be used with the appropriate refrigerant.
Series RNB-Dry Plastic Case, Brass Internals | |||||
Dia | Case | Type | Range | Specify Refrigerant | Detail |
---|---|---|---|---|---|
2½” | RED | High | 0 – 500 psi | R-12/R-134 | More |
2½” | BLUE | Low | 30-0-120/300 psi | R-12/R-134 | More |
GAS TEST GAUGE ASSEMBLIES & COMPONENTS
![Series GT gauge](https://cwireptech.com/industrialsupply/g8sgauge.gif)
Series GT-Dry, Steel Case, Brass Internals | More |
15 psi | Available |
30, 60 or 100 psi range, assembly | Available |
Manifold block only | Available |
Air valve & Cap | Available |
![Series AI](https://cwireptech.com/industrialsupply/seraisgauge.gif)
Gauges have steel internal movement, socket and case for use with anhydrous ammonia, nitrogen and other liquid fertilizers or ammonia based chemicals. Accuracy meets ANSI Standard B40.1. Socket ¼”.
Series AI-Dry, Steel Case & Internals | ||||
Application | Dia | Range | Model | Detail |
---|---|---|---|---|
Agriculture | 2½” | 60, 150 or 400 psi | PAI | More |
Industrial | 2½” | 30-0-160 or 30-0-300 | CAI | More |
Industrial | 3½” | 30-0-160 or 30-0-300 | CAI | More |
![Series WT](https://cwireptech.com/industrialsupply/serwtsgauge.gif)
Top mount 2½” gauge with hose connection. Available with max pointer.
Series WT-Dry, Plastic Case, Brass Internals | |||
Dia | Psi | Max Pointer | Detail |
---|---|---|---|
2½” | 300 | No | More |
2½” | 300 | Yes | More |
Swivel connection ¾” x ¼” FPT, available | |||
Monel mini filter, available |
![Series DB](https://cwireptech.com/industrialsupply/notrubersgauge.gif)
For low pressure use as conventional gauges are not accurate below 10 PSI. Models have black steel case & can be adjusted under pressure. Meets ANSI code B40.1 with 3-3-3% accuracy.
Series DB-Dry, Steel Case, Brass Internals | ||
Ranges Available | Specifications | |
---|---|---|
Single ScaleDual ScaleWater ColumnLow PSI10 Oz*20 Oz/35″15″WC3*15 Oz*35 Oz/60″30″WC530 Oz*60 Oz/100″60″WC1060 Oz* 100″WC 100 Oz* 200″WC 300″WC | ModelDiaNPTStandard2½”¼”LMPressure** Recalibrator2½” 2½”¼”LM ¼”CBVacuum** Recalibrator2½” ¼”LM ¼”CB | |
NOTE: ” indicates inches of water column. * Recalibrator models only. ** Available either Pressure or * Vacuum. Vacuum models are Recalibrator type only – secondary stock call for availability/delivery. |
![Ton
Gauges](https://cwireptech.com/industrialsupply/tonsgauge.gif)
Ton gauges are available standard in a 4″ stainless steel case with ¼” lower mount connection either liquid filled or dry, 1% full scale accuracy. Optional cases (Phenolic Process Gauge case) and fittings available. Most ranges available, ram size and tonnage needs required. All ton gauges special order, allow 3 days for manufacturing.
CUSTOM TON GAUGES
Made to your specifications – Just call with the tons or psi and the overall ram size. delivery? Usually 1 – 2 days.
TON GAUGES (Stock Press Models) | |||||||
Dia | Socket Top Mount | Pressure Tons Force | Ram O/D | Case | Internals | Net Price | Detail |
---|---|---|---|---|---|---|---|
4″ | 1/3″ | 40/50/60 | 3″/ 3 1/2″ /4″ | Chrome Steel | Brass | $14.55 | More |
4″ | 1/4″ | 55 | 3 1/2″ | Chrome Steel | Brass | $14.55 |
![Series LM gauge](https://cwireptech.com/industrialsupply/serpsgsgauge.gif)
For testing LP or natural gas systems. Kit includes special carrying case with foam liner to protect gauge from rough handling. 3′ hose with adapter and recalibratable 20 oz./35″ H20 diaphragm gauge. Other standard range diaphragm gauges may be substituted at no extra charge.
GAS TEST KIT | ||
Complete With Case | Available | Detail |
---|---|---|
Without Case | Available | More |